Used Oncology Hood
Manufacture year: 2021
Excellent Working Condition
Brand: Across International
Last Used in 2023
Dimensions - 42.8"x30.5"x89" fully assembled
Approx. Weight: 450
Reason for Sale: No longer needed
NSF Certified 3 Ft Class II Type A2 Biosafety Cabinet by Across International
PRACTICALLY BRAND NEW!! Only 900 hours of used time!!
Either local pick-up in NY or buyer is responsible for freight arrangements and pricing
A biosafety cabinet also called a biological safety cabinet or microbiological safety cabinet is an enclosed, ventilated laboratory workspace for safely working with materials contaminated with (or potentially contaminated with) pathogens requiring a defined
The primary purpose of a BSC is to serve as a means to protect the laboratory worker and the surrounding environment from pathogens. All exhaust air is HEPA-filtered as it exits the biosafety cabinet, removing harmful bacteria and viruses. This is in contrast to a laminar flow clean bench, which blows unfiltered exhaust air towards the user and is not safe for work with pathogenic agents. Neither are most BSCs safe for use as fume hoods. Likewise, a fume hood fails to provide the environmental protection that HEPA filtration in a BSC would provide. However, most classes of BSCs have a secondary purpose to maintain the sterility of materials inside (the "product").
Class II cabinets provide both kinds of protection (of the samples and of the environment) since makeup air is also HEPA-filtered. There are five types: Type A1 (formerly A), Type A2 (formerly A/B3), Type B1, Type B2 and Type C1. Each type's requirements are defined by NSF International Standard 49, which in 2002 reclassified A/B3 cabinets (classified under the latter type if connected to an exhaust duct) as Type A2, and added the Type C1 in the 2016 standard. About 90% of all biosafety cabinets installed are Type A2 cabinets.
All specifications:
Model-BC-3F
Electrical requirements- 115V 60Hz 1-Phase 400 watts
Chamber-
Dimensions: 35.8 x 23.5 x 26"
Material: 304 stainless steel
Power outlet with cover: four, < 500 watts
Water port x 1, stainless steel
Gas port x 1, stainless steel
Surface height from ground: 29.5"
Hanging bar: stainless steel, with 10 hooks
Lights-
LED lights: 10W x 2, > 1000 Lux
UV lights: 20W (Germicidal UV lamp, emission 253.7 nanometers)
- UV lights available only when front glass panel is fully closed.
- Recommended replacement interval: 600 hours
Air flow-
Volume
Inflow: 255 CFM (cubic feet per minute)
Downflow: 380 CFM
Exhaust: 255 CFM
Speed
Inflow: 100-110 FPM (feet per minute)
Downflow: 60-70 FPM
Motor: 1/2 HP, 9A
- 70% recirculated internally, 30% discharged from top vent
- Air circulation available only when front glass panel is open
Top clearance-
12" (recommended)
HEPA (High-Efficiency
Particulate Air) filter
Two, with 99.999% efficiency at 0.3 μm diameter
Filter hour indicator and life bar on controller
- Recommended replacement interval: 4,000 hours
Front safety panel
Material: tempered safety glass (thickness > 5mm), dual-layer, laminated, UV blocking
Recommended opening height: 10"
Maximum opening height: 20.5"
Material:
Chamber: 304 stainless steel
Main body: powder coated steel
Controller: LCD screen with soft touch buttons and remote control
Noise: < 65 dB(A)
Casters: Four, with stationable feet
Unit weight & dimensions:
Unit: 450 Lbs
Unit: 42.8 x 30.5 x 89" (fully assembled, WxDxH)
Safety:
Abnormal airflow alarm
Filter replacement alarm
Front glass panel unsafe height
Compliance:
NSF/ANSI 49 (C0559576)
$7,000 MAKE OFFER
Shipping is an extra cost - Will need crating transport
In Nassau County, New York
K356EO
